Nokia 9500

This phone has a Bluetooth® wireless implementation compatible with "Blue&Me™" device but has not been fully tested yet.

Functions Supported Dial from the car kit Yes Reject incoming call Yes Redial Yes(1) User defined ring tone (kept from the phone) Yes Network provider name No Conference call Yes Call waiting (second incoming call) Yes Caller ID as stored in the phonebook Yes Automatic contacts synchronization Yes(2) Contacts download one by one Yes by selection Yes fully automatic Yes(2) Transfer the audio out to your phone (private call) No(3) Muting (Local privacy) Yes SMS reader No

How to pair

Before using your mobile phone with Blue&Me™, you must create a pairing relationship between the mobile phone and Blue&Me™. After this procedure, Blue&Me™ will automatically connect to your phone each time that you enter the car and turn the car's key to the 'on' position.

To create a pairing relationship using manual interaction, follow these steps when the car is not moving:
Navigate to the Blue&Me Setup / Setup, Pairing, and then press <SRC> or <TEL>. Blue&Me™ starts the pairing procedure.
Blue&Me™ shows the mobile phone pairing PIN number on the display screen and also speaks the PIN number.

Procedure on the mobile phone

• From main menu select TOOLS
• Select CONTROL PANEL, select CONNECTION
• Select BLUETOOTH, check if BLUETOOTH ACTIVE is set to Yes
• Move to the PAIRED DEVICES tab
• Press NEW button, select "Blue&Me", press PAIR
• Enter the PIN at ENTER PASSCODE prompt
• Press YES when requested to authorize the connection
• Press CLOSE.
  

Tips & Tricks

(1) Calling number:

• Upon a second incoming call, the phone passes the number of the calling party (CIL: Call Line Identification) with the "+" sign left out from the international prefix (such as +39 for Italy). In this particular case the recall "last received call" function is unworkable.

(2) Contacts download:

In order for a phone to be able to successfully transfer phonebook data to the device, the phone requires the device to be setup as a "SyncML Client".
Follow the below instructions for setting up the client device on a Bluetooth phone in order to use SyncML for phonebook downloading to the Blue&Me™ device.

SyncML Setup:

• Press DESK, select TOOLS, select SYNC
• Press Ctrl-N.
• Press NO when asked to "Do you wanto to copy from ...?". (wait...)
• Set "Profile Name" to: "Blue&Me", press NEXT.
• Set "Connection type" to: Bluetooth, press NEXT.
• Set "Host address" to: "Blue&Me", left other fields empty, press NEXT.
• Set "Contacts" to YES even if it is already set to YES, press NEXT.
• At "Local database" left setting as is.
• Set "Remote database" to: "Contacts", press NEXT.
• Set "Set as default profile" to: YES, press NEXT.
• Press FINISH

Note: SyncML is case sensitive concerning the host name. Be sure to enter "Blue&Me" with that case.

(3) Audio transfer:

The phone disconnects Bluetooth when user transfers the audio path to the phone. To workaround the problem while disconnected press <TEL> button twice to re-establish the connection and transfer the audio path back to the Blue&Me™ device.

Auto Answer:

• From your phone, press MENU.
• Select SETTINGS, press SELECT, select ACCCESSORY SETTINGS, press SELECT.
• Select HANDSFREE, press SELECT.
• Select AUTOMATIC ANSWER, press SELECT, select ON, press SELECT.

Read firmware version:

• From the phone's splash screen
• Press *#0000#