Blue&Me

Nokia N70

This phone has a Bluetooth® wireless implementation compatible with "Blue&Me™" device.

Functions		Supported
Dial from the car kit		Yes
Reject incoming call		Yes
Redial		Yes
User defined ring tone (kept from the phone)		Yes
Network provider name		No
Conference call		Yes
Call waiting (second incoming call)		Yes
Caller ID as stored in the phonebook		Yes
Automatic contacts synchronization		No(1)
Contacts download	one by one	Yes
	by selection	Yes
	fully automatic	No(1)
Transfer the audio out to your phone (private call)		No(2)
Muting (Local privacy)		Yes
SMS reader		No

How to pair

Before using your mobile phone with Blue&Me™, you must create a pairing relationship between the mobile phone and Blue&Me™. After this procedure, Blue&Me™ will automatically connect to your phone each time that you enter the car and turn the car's key to the 'on' position.

To create a pairing relationship using manual interaction, follow these steps when the car is not moving:
Navigate to the Blue&Me Setup / Setup, Pairing, and then press <SRC> or <TEL>. Blue&Me™ starts the pairing procedure.
Blue&Me™ shows the mobile phone pairing PIN number on the display screen and also speaks the PIN number.

Procedure on the mobile phone

Go to the Screen Menu .
Select the CONNECTIVITY FILE.
Select the BLUETOOTH icon.
Check BLUETOOTH is Enabled.
Select DEVICES menu tapping the knob to the right.
Choose NEW PAIRED DEVICE.
Select "Blue&Me" device.
Enter the PIN.
After the "bip" set device as autorised by pressing YES.

Tips & Tricks

(1) Contacts download:

The phone we tested did non have an SyncML implementation compatible with "Blue&Me™", hence the automatic contacts download failed. Since phones with earlier software release may have the SyncML compatible with "Blue&Me™"the following are the steps to setup SyncML properly.

In order for a phone to be able to successfully transfer phonebook data to the device, the phone requires the device to be setup as a "SyncML Client".
Follow the below instructions for setting up the client device on a Bluetooth phone in order to use SyncML for phonebook downloading to the Blue&Me™ device.

SyncML Setup:

Note: [Enter] Accomplished by pressing IN on the joystick/Dpad.

From your phone, press Menu (key).
Select CONNECT., press [Enter], select SYNC, press [Enter].
Press OPTIONS, select NEW SYNC PROFILE, press [Enter].
Respond to the dialog "Copy Values from profile 'PC Suite'?" with YES.
Edit the new profile by pressing, OPTIONS, select EDIT SYNC PROFILE, press [Enter].
Highlight SYNC PROFILE NAME, press SELECT, change name to "Blue&Me", press OK or [Enter].
Note: SyncML is case sensitive concerning the host name. Be sure to enter "Blue&Me" with that case.
Select HOST ADDRESS, press [Enter], change name to "Blue&Me", press OK or [Enter].
Move to the right by tapping the knob, select contacts, select YES, press OK o [Enter].
Select REMOTE DATABASE, press [Enter]
Modify if necessary to "Contacts", premere OK o [Enter].
Verify that SYNCHRONISATION TYPE is set to NORMAL.
Press BACK to save the settings.

(2) Audio transfer:

The phone disconnects Bluetooth when user transfers the audio path to the phone. To workaround the problem while disconnected press <TEL> button twice to re-establish the connection and transfer the audio path back to the Blue&Me™ device.

Automatic Answer:

From main menu, select TOOLS, press SELECT.
select SETTINGS, press SELECT.
Select ENHANCEMENT, press SELECT.
Select BLUETOOTH HANDSFREE, press SELECT.
Select AUTOMATIC ANSWER, press SELECT to change the status, set to ON.

Read firmware version:

From the phone's splash screen
Press *#0000#